Flying-Hobby
TREX 700-TRIPLE-BEARING ALUMINUM ENGINE BEARING BLOCK
Description:, -The new precision thriple-bearing aluminum engine block is designed to replace stock plastic engine block for T-REX 700 Nitro helicopters. The new aluminum engine block is designed with rigid one-piece aluminum block to avoid wear-out problem that leads to unalignment of the pinion to the main gear, thus causing the gear strip problem. The bearing block is very well designed to have both rigidity, precision and very light weight. To further strengthen the engine clutch, this new design incorporates an additional third bearing into the engine block. This additional bearing provides great support for the motor pinion shaft to keep the pinion always aligns with the main gear. This engine block is the ticket to solve main gear strip problem on the T-REX 700 helicopters., Includes:, -One aluminum engine block, Features:*,
-Black anodizing version -One aluminum engine block cap -One (1) ...Flying-Hobby
GENS ACE 3300MAH 22.2V 35C 6S1P LIPO
| - Product Type | lipo battery pack |
| - Capacity | 3300mAh |
| - Voltage | 22.2V |
| - Max Continuous Discharge | 35C |
| - Max Burst Discharge | 70C |
| - Weight | 543.3 |
| - Dimensions | 138.45*43*43.71mm (L*W*H) |
| - Balance Plug | JST-XH |
| - Discharge Plug | T plug |
| - Charge Rate | 1-3C Recommended, 5C Max |
Gens ace lipo 3300mah 6S1P 35C/70C battery Suited to the following models: 500 size helicopter.Such as Trex-500,KINGMAX's TOUCHSKY 500 size R/C electric helicopter ,MD500 hughes,
INCLUDE XT CONNECTOR Spec. (115.5A) (231A) 1. Matched strictly by ...Flying-Hobby
GENS ACE 2200MAH 11.1V 60C 3S1P LIPO
| - Product Type | lipo battery pack |
| - Capacity | 2200mAh |
| - Voltage | 11.1V |
| - Max Continuous Discharge | 60C (156A) |
| - Max Burst Discharge | 110C (242A) |
| - Dimensions | 105.05*33.53*24.27mm |
| - Balance Plug | JST-XH |
| - Discharge Plug | 4.0mm banana or T plug |
| - Charge Rate | 1-3C Recommended, 5C Max |
| Gens ace lipo 2200mah 3s1p 60c/110c battery Suited to the following models | Most 450 size helicopter, Fun Cub, Fox Glider, Wild Hawk, P-51, Parkzone etc. |
- Weight::184g,
INCLUDE T CONNECTOR Spec. 1. Matched strictly by the lowest ...Flying-Hobby
DJI SPREADING WINGS S800 PART NO.2 - FRAME ARM ( EVO CLOCKWISE )
| Total weight | 139.5 g; |
| Working temperature | – 20-70°C; |
| Signal wire standard | 22 AWG SR Wires; |
| Power cord standard | 16 AWG SR Wires; |
S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, Features:, Compatible with S800;,
Greatly enhanced rigidity; Multistrand SR Wires of power and signal ...Flying-Hobby
DJI SPREADING WINGS S800 PART NO.1 - FRAME ARM ( EVO COUNTER CLOCKWISE )
| Total weight | 139.5 g; |
| Working temperature | – 20-70°C; |
| Signal wire standard | 22 AWG SR Wires; |
| Power cord standard | 16 AWG SR Wires; |
S800 EVO Frame Arm description:, The arm has a new, strengthened structure design with greatly enhanced rigidity. Multistrand SR Wires of power and signal lines are embedded which has improved the system reliability comprehensively. The S800 ESC and motors can be installed directly onto the arm., Specification:, Features:, Compatible with S800;,
Greatly enhanced rigidity; Multistrand SR Wires of power and signal ...Flying-Hobby
X7 66T CROWN GEAR HUB WITH ONE WAY SLEEVE (STRENGTHENED UPGRADE)
| X7 One Way Main Gear Set (Strenghthened Upgrade) Model | 217170 |
This is used for:,
Flying-Hobby
HOBBYWING PENTIUM -12A
| 5.6V --- 16.8V ( Lithium | 2 – 4s or NiMH/NiCd 5 -12 Cells) |
| 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM | BrushLess Motor) |
| 3 sets of gold plated motor connectors and heat-shrink tubings (Remark | motor connectors and heat-shrink tubings need to be purchased additionally) |
:, Continues 12A, Burst 15A up to 10 Secs., :, :linear mode BEC 1A, Max Speed:, : 24mm*32mm*8mm(width*length*height), :12g, Packaging include:, , Safety Arming Feature:, Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened., Calibration:, Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters., :?, :, brake enabled / brake disabled, default is brake disabled, : Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)?default is Li-xx., :, power reducing / power cutoff, default is power reducing., :, low / medium / high, default is medium cutoff voltage., 1) For Li-xx battery?number of battery cells are judged automatically?low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V., 2) For Ni-xx battery, low / medium / high cutoff voltages are 0/45%/60% of the startup voltage. (0% means the low voltage cutoff function is disabled). For example: 10 cells NiMH battery, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V, Startup mode:, normal / soft / super-soft, default is normal startup., Timing:, low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used., eatures:, Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.,
1 Specification 1.1 Output 1.2 Input Voltage 1.3 BEC (Battery ...Flying-Hobby
NOVA GOBLIN 500 UPGRADE PARTS COMBO SET
Combo Included :, NOVA Goblin 500 Counter Bearing Motor Mount NO-G5005 x 1,
NOVA Goblin 500 Ultra Landing Gear Support - Silver NO-G5007 ...Flying-Hobby
EDGE 603MM PREMIUM CF BLADES - FLYBARLESS VERSION
| Specs | - Length |
| - Width | 55mm |
| - Root | 12mm |
| - Bolt Hole | 4mm |
| - Weight | ~ 135 grams |
Description :, EDGE high performance CF rotor blades are new premium blades that have been specifically designed for today's model helicopters. EDGE rotor blades have been optimized for use with today's light weight, high powered models with increased cyclic pitch. While these blades are ideal for aggressive Flybarless 3D performance, they can also be used for more precision FAI & FC3 flying on traditional flybar machines., Features:, - Airfoil designed specifically for flybarless helicopters., Includes:, - One pair of EDGE blades.,
Flybarless Edge blades may be flown on a traditional flybar ...Flying-Hobby
HEAT SINK FIXER
| External diameter | 26mm |
| Internal diameter | 10mm |
| Gap | apply to 16/17mm |
| Thickness | 1.5mm |
| Weight | 1.5g x 1pcs |
Insturction:, Apply to 350?380?480T Motor, Spceification:, High efficient heat sink,Aluminum alloy material.,
Flying-Hobby
RJX FS-0521 HV STANDARD DS SERVO X 3 COMBO
| Combo Included | RJX-FS-0521HV x 3 |
| Operation Voltage | 6V-8.4V |
| Weight | 68g ( 2.4oz) |
| Torque | 17kg@6V |
| Speed | 0.05(sec/60°)@8.4V |
| Dimensions | 20x37x40 |
| Frequency | 1520us/333hz |
| Gear Type | metal Gear |
| Motor Type | Coreless Motor |
Technical Data:,
19kg@7.4V 21kg@8.4V 0.055(sec/60°)@7.4V 0.07(sec/60°)@6VFlying-Hobby
MAIN SHAFT FOR (EP200)
Suitable Model :,
For EP100 PRO / EP200SE/SD EP-100 STD EP-100 PRO EP-200 ...